How to Assemble the Superfun R2 Electric Bike: A Comprehensive Guide
Table of Contents
1.Configuration Table
- Item Name: Product specification
- Vehicle Size: 64.5 * 26 * 46 inches
- Packing Size: 56 * 10.6 * 34 inches
- Color: Black (customized)
- Frame Material: Chrome molybdenum steel
- Net Weight: 83 lbs
- Gross Weight: 103 lbs
- Max. Support Weight: 330 lbs
- Function 1/2/3: Power cycling/Before the suspension/SHIMANO shifts gears
- Speed: 12/22/31 MPH for US
- Inner Tube Tire Pressure: 20 PSI / 140 KPA
- eBike Computer: R2
- Charger: AC-DC 54.6V 2A 100-240V AC DC5.5X2.1
- Battery: 48V 18AH
- Brake System: Front and rear mechanical disc brakes
- Tire: 20 × 4.0 inches
- Pedal: Aluminum alloy pedal
- Motor: 750W
2.Assembly Instructions
The following assembly steps are a general guide to assist in the assembly of your 20 inch mountain bike. This is not a complete or comprehensive manual of all aspects of assembly, maintenance, and repair. We recommend consulting a certified, reputable bike mechanic to assist in the assembly, repair, and maintenance of your 20 inch mountain bike.Step 1: Unpacking the electric bike
Unpack the 20 inch fat tire electric bike from the carton and carefully set out all contents of the box.Remove packaging materials protecting the 20 inch fat tire electric bike frame and components. Ensure all pieces are included in the package:
R2 750 watt electric bike:
- Manual(s)
- Assembly Tool kit
- Front fender
- Front wheel
- Handlebar
- Handlebar holder
- Charger
- Pedals (marked left and right)
- Battery keys (two, identical with number)
- Recycle packaging materials, especially cardboard and foam (#6 EPS foam).
When unpacking, it's essential to handle each component with care to avoid any damage. For instance, you might want to use a pair of scissors to cut the tape gently rather than tearing it open, which could scratch the 750 watt electric bike's surface. Moreover, laying out all the parts neatly on a flat, clean surface can help you keep track of everything and make the assembly process smoother.
Step 2: Installing the Handlebar of 20 inch mountain bike
- Check whether the outer carton is complete and unpack it.
- Take out the bicycle frame.
- Take out the accessories and tooling kit.
- Pull off the silicone protective cover on the top of the front fork.
- Use the M5 Allen wrench to unscrew the screw.
- Remove the screw.
- Take out the handle holder from the tooling kit and put it into the round tube of the front fork.
- Adjust the direction of the handle holder so that it faces the front.
- Slightly screw to fix it, ensuring the handlebar holder can be moved up and down, and not too tight.
- Put on the decorative cover and insert the screws.
- Tighten the screws with an M5 Allen wrench to ensure the front fork fits closely with the frame, with no gaps or shakes.
- Put on the silicone protective cover and tighten the side screws.
- Use an M5 Allen wrench to unscrew the 4 screws on the handlebar holder, and remove the cover parts.
- Place the handlebar and adjust it to the appropriate position.
- Place the cover parts back to the original position and screw in the 4 screws.
Step 3: Installing Front Fenders and Front Wheels
- 16.Take out the front fender, M5 Allen wrench, and socket wrench from the tooling kit.
- 17.Place small parts according to the sequence in the picture.
- 18.Tighten the screws until the front fender is immovable.
- 19.Take out the disc brake from the toolbox and install it on the front wheel, then insert the front wheel into the front fork slot.
- 20.Place small parts according to the sequence in the picture (same on both sides).
- 21.Tighten with the 12-14 wrenches until it is not loose.
- 22.Install the right pedal (R) and left pedal (L).
- 23.Insert the pedal(s) into the crank arms in a clockwise direction.
- 24.Use the 13-15 wrench to tighten the pedals (same on both sides).
- 25.Ensure the display is set up.
- 26.Press and hold the red button for 3 seconds to power it on.
- 27.Ensure data is showing on the display.
Step 4: Inflate Tires to Desired PSI
- 28.Inflate tires to the desired PSI. The recommended tire pressure is marked on the tire side.
- Do not over-inflate or under-inflate tires.
- 29.Use proper tire pressure.
- 30.Put the rear fender bracket into the buckle as shown in the picture, and tighten the screws.
Conclusion
Assembling your Superfun R2 best electric bikes for adults is a straightforward process when you follow the detailed instructions provided. By carefully unpacking and assembling the components, ensuring proper installation of the handlebar, fenders, wheels, and pedals, and adjusting the tire pressure, you'll be ready to enjoy the impressive capabilities of your new e-bike. Remember, for any complex repairs or maintenance, consulting a certified bike mechanic is always a good practice to ensure the longevity and performance of your bike. Enjoy the ride!
By following this comprehensive guide, you ensure that your Superfun R2 best electric bikes for adults is assembled correctly, enhancing its performance and your riding experience. Whether commuting, exercising, or enjoying leisure rides, this affordable mountain bikes will provide a reliable and enjoyable journey. The combination of its powerful motor, sturdy frame, and advanced features make it an excellent choice for any cycling enthusiast.
Dejar un comentario